Miele K 8967 S ed-1 작동 및 설치 지침 - 페이지 13

{카테고리_이름} Miele K 8967 S ed-1에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 8967 S ed-1 40 페이지. With stayfresh section
Miele K 8967 S ed-1에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (40 페이지)

페이지 인쇄

Before using for the first time

The stainless steel surface has a layer

of protective foil to prevent scratching

during transportation.

^ Do not remove this foil until the

appliance has been installed or built

in. Start at one of the upper corners.

^ Clean stainless steel surfaces with a

suitable conditioning agent for

stainless steel.

^ Clean the inside of the appliance and

the accessories with warm water and

a little washing up liquid, and then

dry with a soft cloth.

Important:

To ensure the correct functioning of

the appliance, let it stand for

between 1½ and 2 hour after

transporting it to its final location

before connecting it to the mains.

Switching on

^ Press the On/Off button.

The temperature display lights up, the

appliance starts cooling. The interior

light will come on when the door is

opened.

Allow the appliance to run for a few

hours before placing food in it. This will

ensure that the temperature is

sufficiently low.

Switching on and off

Switching off

^ Press the On/Off button until the

temperature display goes out.

The cooling system is switched off. (If

this does not happen, the safety lock is

still activated).

Safety lock

The safety lock can be activated to

prevent the appliance being switched

off inadvertently.

Activating or de-activating the safety

lock

^ Press and hold the Super cool button

for approx. 5 seconds.

The Super cool indicator light flashes

;

and a

flashes in the temperature

display.

^ Press the Super cool button again.

;

lights up in the temperature display.

^ You can now choose between

;

1 by pressing the temperature

and

selector buttons:

0: the safety lock is de-activated,

1: the safety lock is activated.

^ Press the Super cool button to save

the setting.

;