Miele KFN 8993 SDE ed 작동 및 설치 지침 - 페이지 41

{카테고리_이름} Miele KFN 8993 SDE ed에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KFN 8993 SDE ed 48 페이지. Miele refrigerator user manual

페이지 인쇄

Do not place any items that prodice

heat on top of the appliance (such

as a toaster or microwave). This will

increase the amount of energy the

appliance consumes.

This fridge/freezer should not be

placed in a side-by-side formation

with a second model. Because the

appliance does not have heated

side walls, a side-by-side

arrangement can lead to the

build-up of condensation water.

Contact your dealer for advice.

Location

The appliance should not be installed

directly next to a heat source (such as

a stove/oven or a radiator), or in direct

sunlight. The higher the adjacent

temperature, the more energy the

appliance requires to keep cool.

Choose a dry, well-ventilated room for

installation.

Climate range

The appliance is designed for use

within a certain temperature range

(room temperature), and should not be

used outside this range. The climate

range is stated on the model plate

inside the appliance.

Installation information

Climate range

If the room is too cold, it will cause the

cooling system in the appliance to

switch off for too long. This can cause

the internal temperature to rise.

Proper ventilation

The air behind the appliance gets

warm. In order to ensure adequate

ventilation, you must ensure that the

vents are not covered or blocked in any

way. Also, the vents must be

dusted/cleaned on a regular basis.

Installation

^ First remove any cable clips from the

rear of the appliance.

^ Check that all parts on the rear the

appliance are free to move. Remove

any obstructions.

^ Gently slide the appliance into the

desired location. The rear of the

appliance can be directly against the

wall.

Room temperature

+10 °C to +32 °C

(50 F to 90 F)

+16 °C to +32 °C

(61 F to 90 F)

+18 °C to +38 °C

(64 F to 100 F)

+18 °C to +43 °C

(64 F to 109)