Miele KS 28463 D 설치 매뉴얼 - 페이지 19

{카테고리_이름} Miele KS 28463 D에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KS 28463 D 21 페이지.

Installation

Aligning the appliance door

The appliance door can be aligned with

the appliance housing after it has been

fitted.

In the following illustration the door is

not shown in the closed position to

make it easier to see what you have to

do.

To align the appliance door, use the

outer slots in the lower hinge plate:

 Remove the centre screw  from the

hinge plate.

 Slightly loosen both outer screws .

 Align the door by sliding the hinge

plate to the left or right.

 Then tighten the screws . The

screw  does not need to be refitted.

11210790-04

The appliance must only be connected

using the connection cable supplied

(AC 220–240 V, 50 Hz supply).

 Appliance plug connector

 Mains plug

The fuse rating must be at least 10 A.

This appliance must be connected to a

suitable switched socket. The electrical

installation must be in compliance with

current local and national safety

regulations.