Miele KT 4353 SD ed 운영 및 설치 매뉴얼 - 페이지 34

{카테고리_이름} Miele KT 4353 SD ed에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KT 4353 SD ed 36 페이지. Fridge freezer with dynamic cooling

Please make sure you follow the

instructions below carefully when

you refit the handle. The door seal

will be damaged if the handle is

fitted incorrectly.

^ Loosely attach the handle to the

opposite side of the door with the two

front screws b.

Mounting plate c must be positioned

on the side of the door so that when the

door is

it is flush with the side of

the appliance.

If this is not the case,

^ Tighten both grub screws a with the

allen key provided until mounting

plate c lines up correctly.

^ Then tighten all 4 fixing screws b.

^ Slide the side section of the handle

d into the guides on the mounting

plate until it clicks into place.

It is important to check that the side

section of the handle d does not

come into contact with the door seal

when opening the door, as this

would damage the door seal

permanently.

If, after you have refitted the handle,

you find that the side section does

touch the door seal when the door is

opened:

^ Realign mounting plate c with grub

screws a until the mounting plate

and the side section of the handle d

are at the correct angle and the side

section does not touch the seal when

the door is opened.