Miele CS 1028 변환 지침 - 페이지 18

{카테고리_이름} Miele CS 1028에 대한 변환 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1028 40 페이지. Combiset
Miele CS 1028에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지)

Converting CS 1028

After conversion

^ After converting the cooktop, affix the

label supplied with the conversion kit

on to the data plate over the type of

gas stated.

^ Reassemble the burner parts in the

reverse order.

^ Check all gas fittings for leaks by

operating the burner without the

combiset surface in place (use a

match to ignite the flame).

^ Remove the loose burner parts again.

^ Replace the combiset surface.

^ Screw the burner base into place,

and replace the other parts of the

burner. Take care to reassemble the

burner in the correct order.

^ Replace the control knob.

^ Light the burner to be sure it is

operating correctly.

When set at "low" or when the control

knob is quickly turned from "high" to low

the flame should not go out.

When set at "high" the gas flame must

burn with the center clearly visible.