Miele CS 1028 G 설치 지침 매뉴얼 - 페이지 23

{카테고리_이름} Miele CS 1028 G에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1028 G 28 페이지. Combiset
Miele CS 1028 G에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지)

페이지 인쇄

Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

In Massachusetts a licensed

plumber/gas fitter is required.

This appliance must be installed

with its own shut off valve and the

included gas pressure regulator.

Both the valve and the regulator

must be easily accessible to the

consumer to turn on or shut off the

gas supply after the appliance is

installed.

This appliance and its individual

shut off valve must be disconnected

from the gas supply during any

pressure testing performed in

excess of ½ psi (3.5 kPa), or

isolated from the gas line by closing

its individual manual shut off valve at

test pressures equal to or less than

½ psi (3.5 kPa).

Any pipe connections must be made

using a thread sealant approved for

gas connections. Failure to correctly

install these items could lead to a

gas leak and subsequent explosion.

Gas connection

The gas connection must be made

in accordance with local codes or, in

the absence of local codes, with

the National Fuel Gas Code,

ANSI Z 223.1/NFPA 54

for the USA

the current Can/CGA B 149.1

and .2 Installation Codes for gas

burning appliances for Canada.

Make sure that the maximum gas

supply pressure before the gas

pressure regulator is never more than

½ psi for both natural gas or LP gas.

The minimum supply pressure to get

the required gas input is

4" w.c. for natural gas:

10" w.c. for LP gas.