Miele CS 1122 작동 및 설치 지침 - 페이지 17

{카테고리_이름} Miele CS 1122에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1122 40 페이지. Ceramic combiset
Miele CS 1122에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (48 페이지), 사용자 설명서 (45 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Do not use a steam cleaner to clean

this appliance. Steam could

penetrate electrical components and

cause a short circuit. Pressurized

steam could cause permanent

damage to the surface.

Do not use any sharp pointed

objects which could damage the

seal between the ceramic surface,

the surrounding frame and the

countertop.

Never use abrasive cleaners,

caustic (oven) cleaners, dishwasher

detergent, scouring pads, steel wool

or hard brushes. They will damage

the surface.

The ceramic surface can be cleaned

using a cleaner for ceramic

surfaces. Follow the manufacturer's

instructions.

Make sure that no cleaner residue

remains on the ceramic surface by

carefully wiping the combiset with a

damp cloth. They may damage the

combiset or produce toxic fumes

when heated.

Be sure that pot and pan bases are

clean and dry.

After cleaning dry the ceramic

surface with a soft cloth to prevent a

build up of limescale deposits.

Cleaning and care

Clean any spills immediately before

they become difficult to remove.

Clean the appliance regularly,

preferably after each use. Allow the

appliance to cool before cleaning.

Ceramic surfaces

^ Wipe off any soiling using a damp

cloth. Stubborn soiling is best

removed with a shielded scraper

blade.

^ Apply a ceramic cleaner (available

from Miele) using a soft cloth or

paper towel.

^ To remove any limescale deposits or

metallic residue apply a ceramic

cleaner using a soft cloth or use a

shielded scraper blade if necessary.

^ After cleaning wipe the ceramic

surface with a damp cloth and dry.

A cleaner with a special additive to

prevent water marks and smears on the

ceramic surface may be used.

Any melted solids like sugar, plastic or

aluminum foil should be removed as

quickly as possible, while the burner is

still warm. If they are allowed to harden

the combiset may become pitted.

^ Turn the burner off.

^ Using a shielded scraper blade,

scrape the melted item immediately

off the burner while it is still hot.

Use caution: Danger of burns!

^ Allow the combiset to cool and clean

as previously described.