Miele CS 1122 작동 및 설치 지침 - 페이지 9

{카테고리_이름} Miele CS 1122에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1122 48 페이지. Ceramic combiset
Miele CS 1122에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 사용자 설명서 (45 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Technical safety

Installation, maintenance and

repairs may only be carried out by a

suitably qualified and competent

person in strict accordance with current

national and local safety regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

Before installation, check the

appliance for visible signs of damage.

Under no circumstances should you

use it if it has been damaged. A

damaged appliance is dangerous.

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with local and national safety

regulations. It is most important that this

basic safety requirement is present and

regularly tested, and where there is any

doubt, the household wiring system

should be inspected by a qualified

electrician. The manufacturer cannot be

held responsible for the consequences

of an inadequate earthing system (e.g.

electric shock).

Before connecting the appliance to

the mains supply make sure that the

connection data on the data plate

(voltage and connected load) match

the mains electricity supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

Warning and Safety instructions

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

For safety reasons, this appliance

may only be used after it has been built

in.

This appliance may be connected

via a fused plug and switched socket. If

you wish to connect it to an isolator

switch, or if the appliance is supplied

without a plug, it must be installed and

connected by a suitably qualified and

competent person in strict accordance

with current local and national safety

regulations. The manufacturer cannot

be held liable for damage caused by

incorrect installation or connection.

If the connection cable is damaged,

it must be replaced by a suitably

qualified electrician with a specialist

connection cable of type H 05 V V-F

(pvc insulated), available from the Miele

Service Department.

Never open the appliance casing.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user and can

cause operational faults.

While the appliance is under

guarantee, repairs should only be

undertaken by a service technician

authorised by the manufacturer.

Otherwise the guarantee will be

invalidated.