Miele CS 1122 사용자 설명서 - 페이지 27

{카테고리_이름} Miele CS 1122에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1122 45 페이지. Ceramic combiset
Miele CS 1122에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (40 페이지)

Safety instructions for installation

General

Fit the wall units and extractor hood

before fitting the appliance to avoid

damaging the appliance.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

A risk assessment of the installation

must be carried out by a suitably

qualified engineer before this appliance

is installed or used. Installation must

only be carried out by a suitably

qualified engineer.

The appliance must be fixed in

position when it is installed. Failure to

do this could result in damage to the

appliance, personal injury and damage

to property.

The hob may only be built in over a

Miele oven if the worktop is at least 40

mm thick.

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Observe carefully the safety

distances given on the following pages.

After installing the hob, ensure that

the connection cable cannot come into

contact with the underside of the

appliance. Make sure that there is no

mechanical obstruction, such as a

drawer, which could damage it.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by the

hob could damage the appliance

below.

All dimensions in this instruction booklet

are given in mm.