Miele CS 1221 작동 및 설치 지침 - 페이지 4

{카테고리_이름} Miele CS 1221에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1221 44 페이지. Ceramic combiset with induction
Miele CS 1221에 대해서도 마찬가지입니다: 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (48 페이지)

페이지 인쇄

IMPORTANT SAFETY INSTRUCTIONS

Technical Safety

Installation, repair and maintenance

work should be performed by a Miele

authorized service technician. Work by

unqualified persons could be

dangerous and may void the warranty.

Be sure your appliance is properly

installed and grounded by a qualified

technician.

Before installing the combiset,

check for externally visible damage.

Do not operate a damaged appliance.

To guarantee the electrical safety of

this appliance, continuity must exist

between the appliance and an effective

grounding system. It is imperative that

this basic safety requirement be met. If

there is any doubt, have the electrical

system of the house checked by a

qualified electrician.

Before installation, make sure that

the voltage and frequency listed on the

data plate correspond with the

household electrical supply. This data

must correspond to prevent injury and

appliance damage. Consult a qualified

electrician if in doubt.

Do not use an extension cord to

connect this appliance to electricity.

Extension cords do not guarantee the

required safety of the appliance.

Before servicing, disconnect the

appliance from the main power supply.

Do not operate any appliance with a

damaged cord or plug, or if the

appliance has been damaged in any

manner. Contact Miele's Technical

Service Department.

Under no circumstances open the

outer casing of the appliance.

The combiset must not be installed

outdoors.

While the appliance is under

warranty repairs should only be

performed by an authorized service

technician. Otherwise the warranty is

void.

In the event of any damage to the

appliance, it must be turned off

immediately and disconnected from the

main power supply. Contact Miele's

Technical Service Department.

Do not use the appliance until it has

been repaired. Ensure power is not

supplied to the appliance until repair

work is completed.

Defective components should be

replaced by Miele original spare parts

only. Only with these parts can the

manufacturer guarantee the safety of

the appliance.