Miele CS 1223 작동 및 설치 지침 - 페이지 14
{카테고리_이름} Miele CS 1223에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1223 44 페이지. Induction wok
Miele CS 1223에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (40 페이지)
페이지 인쇄
Induction
The induction principle
An induction coil is located underneath
the induction wok. When the appliance
is switched on, this coil creates a
magnetic field. This magnetic field in
turn creates, or induces, current in the
base of the wok on it. This heats up the
base of the wok. The wok basin itself is
heated up indirectly by the heat given
off by the wok pan.
The appliance only works when the wok
supplied is used (see "Suitable pans").
Induction heating does not work...
– if it is switched on without the wok in
place.
– if the wok is removed from the
appliance whilst it is switched on.
If this happens, ß will flash in the
display.
If the wok is replaced within 3 minutes,
the ß symbol will go out and you can
continue as normal.
If the wok is not replaced, the induction
wok will switch off automatically after 3
minutes. 0 and C flash alternately in the
display.
To use the induction wok again, first
turn the control to "0".
14
Take particular care never to place
cutlery or other metal objects on the
appliance. When the appliance is
switched on either deliberately or by
mistake, or when there is residual
heat present, there is the risk of
metal items heating up with the
danger of burning.
Switch the appliance off after use.