Miele GAS COMBISET CS 1011 변환 지침 - 페이지 12

{카테고리_이름} Miele GAS COMBISET CS 1011에 대한 변환 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele GAS COMBISET CS 1011 40 페이지. Gas combiset
Miele GAS COMBISET CS 1011에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지), 작동 및 설치 지침 (48 페이지)

페이지 인쇄

Converting CS 1012

After conversion

^ After converting the cooktop, affix the

label supplied with the conversion kit

on to the data plate over the type of

gas stated.

^ Reassemble the burner parts in the

reverse order.

^ Check all gas fittings for leaks by

operating the burners without the

combiset surface in place (use a

match to ignite the flame).

^ Remove the burner parts again.

^ Replace the combiset surface.

^ Screw the burner bases into place,

and replace the other parts of the

burners. Take care to reassemble the

burners in the correct order.

^ Replace the control knobs.

^ Light each of the burners in turn to be

sure they are operating correctly.

When set at "low" or when the control

knob is quickly turned from "high" to low

the flame should not go out.

When set at "high" the gas flame must

burn with the center clearly visible.