Miele GAS COMBISET CS 1012 제품 치수

{카테고리_이름} Miele GAS COMBISET CS 1012에 대한 제품 치수을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele GAS COMBISET CS 1012 4 페이지. Double gas combiset
Miele GAS COMBISET CS 1012에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 변환 지침 (40 페이지)

페이지 인쇄

Product and Cut-out Dimensions

CS 1012 Double Gas CombiSet

Location Codes

1 – Spring clips

2 – Appliance front

3 – Installation height

4 – Power supply box with connection cable with plug, Length = 47 1/4" (1200 mm)

120 V, 60 Hz, 15 A fuse rating. Actual power consumption (during ignition only) is 25 W.

Ensure that the power outlet is accessible after installation

5 – ½" NPT Gas fitting. The combiset should be ordered for either natural gas or LP gas. For your convenience an AGA

or CGA approved flexible stainless steel gas hose (accordion type) may be used between the gas connection and

the Miele regulator

the Miele regulator.

6 – Rating label – Ensure that the electrical supply matches the rating. Adhere rating label sticker supplied with the

appliance into the manual.

Shipping weight 18 lbs (8.1 kg)

Shipping dimensions 24" (610 mm) L x 16" (406 mm) W x 8" (203 mm) H

Notes

Indoor use

The combiset must not be installed over a dishwasher, wine storage, refrigerator or freezer. Heat radiated by the

combiset may damage the appliances.

Deep fat fryers must not be installed directly next to a gas combiset. A minimum distance of 11 5/16" is required.

The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of

the appliance provides a sufficient seal for the countertop.

All installations must be done in accordance with local codes.

Drawing is not to scale

Page 1 of 4

Specification Sheets OJS 02212012