Miele KM 2012 사용 설명서 - 페이지 16

{카테고리_이름} Miele KM 2012에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 2012 44 페이지. Gas cooktops
Miele KM 2012에 대해서도 마찬가지입니다: 설치 매뉴얼 (21 페이지)

Operation

The control is used to ignite the burner and to regulate the

strength of the flame.

ßThe gas supply is turned off

& Strong flame

/ Weak flame

The burners can only be switched on by pressing in the

appropriate control and turning it anti-clockwise, and

switched off by turning the control clockwise.

The following will cause damage to the appliance:

Switching on the burner without pressing the control

down,

Switching the burner on by turning the control

clockwise,

Switching the burner off by turning the control anti-

clockwise.

The manufacturer will not accept liability for any damage

resulting from incorrect operation.

Do not leave the appliance unattended whilst it is

being used.

^ The control for the burner required must be pressed in and

turned anti-clockwise to the large flame symbol to switch

on.

A spark is automatically produced on all burners when a

control knob is activated. This is completely normal and

does not indicate a fault with the appliance.

^ When the flame ignites, keep the control pressed in for

8-10 seconds, and then let it go.

^ If the flame goes out turn the control to "ß" and wait for at

least 1 minute before trying to ignite it again. If necessary

keep the control pressed in for longer.

^ If the burner does not ignite after a second attempt turn the

control back to "ß" and go to the "Problem solving guide" for

advice.