Miele KM 342 G 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Miele KM 342 G에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 342 G 20 페이지.
Miele KM 342 G에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지)

페이지 인쇄

Electrical connection

This appliance must be electrically

grounded according to local or

national codes.

All electrical work should be

performed by a qualified electrician

in accordance with local codes and

the:

National Electrical Code

ANSI / NFPA No. 70

for the USA

Canadian Electrical Code Part I

for Canada

(CSA Standard C 22.1).

WARNING:

Disconnect the appliance from the main

power supply before installation or

service. To reduce the risk of electric

shock, make sure that the appliance is

properly grounded after installation.

Power supply:

The automatic ignition requires that the

cooktop be connected to a 120 VAC,

60 Hz power supply. The supply line

should be protected by a 15A fuse.

Actual power consumption (during

ignition only) is 25W.

This appliance is equipped with a 4 ft.

(1.2 m) long power cord that is ready

for connection to the appropriate outlet.

Please place the power outlet so that it

is accessible after the appliance has

been installed in the countertop.

This appliance is equipped with a

three-prong grounding plug to

prevent shock hazards. It should be

plugged directly into a properly

grounded outlet. Do not cut or

remove the grounding prong from

the plug. If the plug does not fit the

outlet, have a proper outlet installed

by a licensed electrician.

To guarantee the electrical safety of

this appliance, continuity must exist

between the appliance and an

effective grounding system. It is

imperative that this basic safety

requirement be met. If there is any

doubt, have the electrical system of

the house checked by a qualified

electrician.

The manufacturer cannot be held

responsible for damages caused by

the lack, or inadequacy, of an

effective grounding system.

Note to the installer:

Please leave these instructions with the

consumer or the appliance.