Miele KM 363 설치 지침 매뉴얼 - 페이지 17

{카테고리_이름} Miele KM 363에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 363 28 페이지.
Miele KM 363에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (28 페이지)

Setting the gas pressure

The gas pressure must be set by the

authorised gas fitter as shown on the

data plate:

Natural gas 1.0 kPa

ULPG (Propane/Butane) 2.75 kPa

The gas pressure must be set with the

largest burner operating at maximum

setting.

For ULPG models

a Connection R ¹/₂" with test point

b Connection R ¹/₂" with test point and

90° angle

When using a 90° angle the building-

in depth will increase to the depth of

the elbow used.

For natural gas models

The gas regulator is only included with

appliances which are set up for

connection to natural gas. The

regulator must be connected directly

to the appliance.

a Pressure Test Point

 Loosen the screw in the test point

 Connect the hose from the pressure

 Reassemble the largest burner, turn

 Disconnect the hose from the

 For natural gas models: Connect the

Gas connection

until it is free in its housing. The

screw is retained in this position.

gauge.

on the gas and manually light the

burner. Set the gas pressure.

pressure gauge and screw in the test

point screw.

gas regulator directly to the

appliance.