Miele KM 400 설치 지침 매뉴얼 - 페이지 10
{카테고리_이름} Miele KM 400에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 400 20 페이지. Ceramic hobs; ceramic contact grill; open grill; deep fat fryer
Miele KM 400에 대해서도 마찬가지입니다: 사용 설명서 (24 페이지), 설치 지침 매뉴얼 (16 페이지), 제품 및 컷아웃 치수 (1 페이지), 사용 설명서 (28 페이지), 사용 설명서 (24 페이지), 설치 지침 매뉴얼 (16 페이지), 설치 지침 매뉴얼 (20 페이지)
페이지 인쇄
Worktop cut-out
Dimensions 7 mm and 11 mm are the
space taken up by the frame of the
appliance on the worktop.
^ Make a cut-out for the hob in the
worktop, paying attention to the
appliance height. See section
"Appliance dimensions".
Dimension "B" applies to a combination
of appliances and is shown on the
chart.
Due to the heat radiated by the hob
and to allow cooking fumes to
dissipate it is essential that a
minimum safety distance is
maintained between the worktop
cut-out and adjacent kitchen units,
e.g. a tall unit. See Warning and
Safety instructions.
10
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture. The materials used must be
heat resistant.
Depth
Number of
in mm
appliances
± 1 mm
1
2
3
4
5
6
7
Important:
The maximum tolerance for the worktop
cut-out must not exceed ± 1 mm.
When building in several combiset
appliances a spacer bar must be
fitted between each unit. (See
"Fitting the spacer bars and spring
clamps").
Worktop cut-out
Width
(=Dim. B)
in mm
± 1 mm
500
266
500
554
500
842
500
1130
500
1418
500
1706
500
1994