Miele KM 404 설치 지침 매뉴얼 - 페이지 16

{카테고리_이름} Miele KM 404에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 404 40 페이지. Gas cooktop
Miele KM 404에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 치수 매뉴얼 (1 페이지), 설치 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (40 페이지), 사용 설명서 (20 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (20 페이지), 사용 설명서 (20 페이지)

Installation KM 404 / KM 405 / KM 406

Fixing the support brackets

^ Position the two support brackets

supplied a in the positions shown in

"Fitting the spacer bars and support

brackets" so that they are flush with

the top edge of the cut-out, and

secure with the 3.5 x 25 mm screws

supplied. 2 screws are needed to

secure each support bracket.

The thickness of the worktop will

determine which drilled hole is used.

Please note that height of the

support bracket for the KM 406 is

different to that for the KM 404 and

KM 405.

On a granite worktop a hole must be

drilled d at the position indicated to

secure each support bracket.

^ Using a piece of strong, double-

sided adhesive tape position the

support brackets supplied a at the

positions indicated flush with the top

edge of the worktop and secure each

bracket with one screw in hole d as

shown.

^ Lay the gas hob in the prepared

cut-out.

^ Draw the electricity connection cable

through the cut-out and connect.

^ Make the gas connection (see

chapter "gas connection").

^ Secure the gas hob from below

through the middle elongated hole b

in each support bracket using the

two screws supplied. Carefully adjust

the hob if necessary.