Allnet ALL0174XG 빠른 설치 매뉴얼 - 페이지 3

{카테고리_이름} Allnet ALL0174XG에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allnet ALL0174XG 5 페이지. Usb 3.0 typ-a/c ethernet adapter 2.5 gigabit lan

Installation

Hardware Installation

1. Connect a CAT5/6/6a Cable to the RJ45 Port on the Network Adapter and to a

Network Device.

2. Connect the USB-A Connector on the Network Adapter to a USB-A/C port on

the Host Computer.

Driver Installation (From Virtual CD)

1. If the Drivers do not automatically download when you connect the Network

Adapter to the Host Computer, a message that a Virtual CD is loaded will appear.

2. Click on the message, the CD Drive screen will open.

3. Click on the folder that is compatible with your Host Computer and run the

RTK_NIC_DRIVER_INSTALLER file to begin the background installation.

To view manuals, FAQs, videos, drivers, downloads, technical drawings,

and more, visit xxxxxxxxxx

Please ensure you have connected your network device(s) to the adapter's LAN

Port via an Ethernet cable and that the adapter plugs into a USB Port.

Notes on Ethernet Cables

■

Sometimes a so-called crossover Ethernet cable is required for connection to

certain network equipments. As adapter's LAN port supports Auto-MDIX

feature, it eliminates the need to use crossover cables.

■

In order to achieve the full 2.5Gbps speeds for this adapter, you will need a

CAT 5e or higher rated Ethernet cable that does not exceed 100m in length.