Miele KM 5656 사용 설명서 - 페이지 20
{카테고리_이름} Miele KM 5656에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 5656 40 페이지. Ceramic cooktop
Miele KM 5656에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 사양 (7 페이지), 제품 및 컷아웃 치수 (1 페이지)
페이지 인쇄
Timer
Setting the timer to turn off a
burner automatically
To use this feature a power level must
be selected for the desired burner.
^ Turn the desired burner on and select
a power level.
^ Touch the m timer sensor.
The display will show 00.
^ Touch the m timer sensor again.
An indicator will light in the time display.
^ If multiple burners are turned on,
press and hold the m timer sensor
until the indicator of the desired
burner lights, e.g. rear right.
With every touch of the m timer sensor
the indicators for the activated burners
light up clockwise from front left to front
right.
^ Press and hold the - or + sensor until
the desired time is displayed, e.g. 15
minutes.
20
The set time counts down in minutes in
the time display. The remaining time is
displayed and can be changed at any
time by pressing - or +. The power level
can also be changed at any time.
When the set time has elapsed:
– the burner will automatically turn off,
– the burner display will show 0,
– the timer display will show 00, and
– an audible signal will be heard.
After a few seconds the tone will stop
and the 00 will go out.
^ To end the signal touch the m sensor.
To toggle between the functions
If the timer is already used with one
function and the second function is
desired:
^ Touch the m sensor.
The timer display will show 00. Follow
the steps as previously described.
To monitor the remaining time in the
function which is not displayed, touch
the m sensor once.