Allnet ALL168205 익스프레스 설정 - 페이지 8

{카테고리_이름} Allnet ALL168205에 대한 익스프레스 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Allnet ALL168205 10 페이지. Powerline ethernet adapter
Allnet ALL168205에 대해서도 마찬가지입니다: 익스프레스 설정 (9 페이지)

페이지 인쇄

LEDs

PWR

(Red)

PLC

(Green/Orange/Red)

ETH

(Green)

(*1) : The "POWER" LED indicator will blink in standby mode. It will automatically get into standby

mode, if the Ethernet-link is lost for 60 seconds. If you unplug the Ethernet cable, it will get into

standby mode after 60 seconds.

Under standby mode, the LINK and ETHERNET LEDs will both be off and the POWER-LED is blinking.

Push Buttons

Push button functions are disabled under Standby mode.

Setup Button Usage:

1. First time to setup your private network:

Step 1. Press and hold the device's "SETUP" button for more than 10 seconds. You can release the

button when you see all the device's LEDs are off and restart. The original network encryption

setting is cleared.

Step 2. Repeat Step 1 to clear another device's original network encryption setting.

Step 3. Press both devices' "SETUP" button for 1 to 3 seconds. You will see both devices' "Power"

LED start blinking. Both devices start to communicate and try to setup their private network

encryption. They will complete the new private network encryption setting within 10 seconds.

You will see both devices' all LEDs are off and restart.

Note: The setup operation timeout is 120 seconds.

Step 4. If failed, please repeat Step 1 to Step 3 again.

2. Add a new device to the existing private network:

Step 1. Plug the new device. Press and hold its "SETUP" button for more than 10 seconds to clear the

original network encryption setting.

Step 2. Press the new device's "SETUP" button for 1 to 3 seconds. The "Power" LED starts blinking.

Step 3. Select a random device from the existing private network. Press its "SETUP" button for 1 to 3

seconds. The device's "Power" LED starts blinking.

ALL 168205 Express-Setup

On: Power on

Blinking: Standby mode (*1)

Off: Power off

On: Powerline Link detected and no traffic

Blinking: Powerline traffic detected

Green: The Powerline connection quality is good

Orange: The Powerline connection quality is fair

Red: The Powerline connection quality is bad

Off: No Powerline Link detected

On: Ethernet Link detected

Blinking: Ethernet traffic detected

Off: No Ethernet Link detected

Page 8