Chroma Color Force 48 사용자 설명서 - 페이지 13

{카테고리_이름} Chroma Color Force 48에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Chroma Color Force 48 17 페이지.
Chroma Color Force 48에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Chroma Color Force 48 사용자 설명서
Channel 1
Channel levels and the corresponding Look numbers:
Channel Level (%)

2.8 Thermal Performance

The Color Force 72 and Color Force 48 fixtures feature 2 internal fans that drive the internal
cooling system.
If the internal temperature of the Color Force exceeds 75ºC the output of the fixture is reduced
for automatic protection. This happens on rare and extreme conditions when ambient
temperature is over 35ºC or the internal fans are blocked or damaged.
The airflow to and from the fan must not be constricted to maintain the maximum operating
capacity of the Color Force.

3. Troubleshooting

Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad
connections, faulty cables and power supplies). For technical support and/or parts, please
contact your selling dealer or the offices listed in this manual.
Symptom
Fixture does not respond
to DMX control.
Color Force User Manual
0
1–2
3–5
6–9
10–11
12–15
16–19
20–22
23-25
26–27
29-32
33–35
36-38
39-42
43-45
46-48
49-51
52-54
56-58
59-61
62-64
65-68
69-71
72-74
75-78
79-81
83-85
86-88
89-91
92-94
95-97
98-100
Possible Cause
Set to wrong or different DMX
address.
Bad cable connecting DMX control
and fixture.
Look
OFF
1
Full Colour Scroll (5 sec)
2
Full Colour Scroll (10 sec)
3
Full Colour Scroll (30 sec)
4
Warm Colour Scroll (5 sec)
5
Warm Colour Scroll (10 sec)
6
Warm Colour Scroll (30 sec)
7
Cold Colour Scroll (5 sec)
8
Cold Colour Scroll (10 sec)
9
Color Colour Scroll (30 sec)
10
Red Full
11
Pink Full
12
Orange Full
13
Light Orange Full
14
Yellow Full
15
Light Yellow Full
16
Green Full
17
Light Green Full
18
Cyan Full
19
Light Cyan Full
20
Blue Full
21
Light Blue Full
22
3200 White
23
5600 White
24
Empty
25
Empty
26
Empty
27
Empty
28
Empty
29
Empty
30
Empty
31
Empty
12
Description
Solution
Check DMX address and
Mode settings.
Check/replace
DMX run
from the console.
V2.0 October 2011