Miele KM 6092 작동 및 설치 지침 - 페이지 43
{카테고리_이름} Miele KM 6092에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele KM 6092 48 페이지. Ceramic cooktops with induction
페이지 인쇄
Preparing the countertop
Create the countertop cut-out as
shown in the cooktop diagram.
Remember to maintain the minimum
safety distances (see "Safety
clearances").
Wooden countertop
Seal any cut surfaces on the wooden
countertop with a special varnish,
silicone rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be
temperature-resistant.
Make sure that the sealant does not
get on countertop surface.
The sealing strip ensures that the
cooktop will sit securely in the cut-out
without slipping. Any gap between the
trim and countertop will become
smaller over time.
Installing the cooktop
Feed the cooktop power cord down
through the countertop cut-out.
Centre the cooktop in the cut-out.
Make sure that the seal under the
cooktop sits flush with the counter on
all sides. This is important to ensure
an effective seal.
If the seal does not sit flush with the
countertop in the corners, the corner
radius (≤ R4) can be carefully cut to fit
using a jigsaw.
Never seal the cooktop using
additional sealant (e.g. silicone).
Connecting the cooktop
Insert the plug housing at the end of
the connection cable into the socket
on the oven.
The plug housing and plug connector
are designed so that only one
connection alignment is possible. Do
not use force to insert the plug. The
protective earth wire is integrated in
the plug housing.
Check that the cooktop works.
Installation
43