Bürkert Magnetventil 6013 운영 지침 - 페이지 4
{카테고리_이름} Bürkert Magnetventil 6013에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bürkert Magnetventil 6013 4 페이지. 2/2-way solenoid valve
페이지 인쇄6
MAINTENANCE,
TROUBLESHOOTING
6.1 Safety instructions
WARNING!
Risk of injury from improper maintenance!
▶ Maintenance may be carried out by authorized technicians only and
with the appropriate tools!
Risk of injury from unintentional activation of the system and an
uncontrolled restart!
▶ Secure system from unintentional activation.
▶ Following maintenance, ensure a controlled restart.
6.2 Malfunctions
If malfunctions occur, check:
• the line connectors,
• the operating pressure,
• the power supply and valve control.
If the valve still does not switch, please contact your Bürkert Service.
10
7.2 Disassembly
→
Turn off the pressure and vent the lines.
→
Switch off the power supply.
→
Loosen the cable plug.
Valve with threaded connection:
→
Hold the device with the open-end wrench on the body and
screw off the pipeline.
Valve with flanged connection:
→
Loosen the nut on the coil and remove coil.
→
Loosen the body from the manifold.
9
TRANSPORT, STORAGE, DISPOSAL
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 - 80 °C.
Damage to the environment caused by device components
contaminated with media.
• Observe applicable regulations on disposal and the environment.
12
english
english
7
DISASSEMBLY
7.1 Safety instructions
DANGER!
Risk of injury from high pressure in the equipment!
▶ Before loosening the lines and valves, turn off the pressure and vent
the lines.
Risk of injury due to electrical shock!
▶ Before reaching into the system, switch off the power supply and
secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations for
electrical equipment!
WARNING!
Risk of injury from improper disassembly!
▶ Disassembly may be carried out by authorized technicians only and
with the appropriate tools!
8
SPARE PARTS
CAUTION!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause injuries
and damage the device and the surrounding area.
▶ Use only original accessories and original spare parts from
Bürkert.
• Coil and fitting can be ordered complete by quoting the identifi-
cation number of the device.
• Wearing part set on request.
english
Type 6013
11