ALLNIC AUDIO HA-5000 소유자 매뉴얼 - 페이지 6
{카테고리_이름} ALLNIC AUDIO HA-5000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO HA-5000 12 페이지. Pre-preamplifier (head amplifier)
ALLNIC AUDIO HA-5000에 대해서도 마찬가지입니다: 소유자 매뉴얼 (7 페이지)
페이지 인쇄
SAFETY
Disconnect the power cord by pulling the plug, not the cable.
•
Keep the power cord away from any heat source.
•
Keep the units away from liquids – do not allow any liquid to enter the interior of the units.
•
When the units are moved from a cold to a warm environment, allow sufficient time for
•
any condensation to evaporate before plugging the units into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the chassis covers without specific authorization from your Allnic dealer.
•
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis and glass
Use only a soft, lint-free cloth dampened slightly with water only (NO cleaning fluids!) to clean
the faceplate and chassis.
B.
Connectors
You may use any good quality contact cleaner recommended for such applications to clean the
contacts from time to time as you deem appropriate.
INITIAL SET-UP
A.
LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio HA-5000 and its power supply need to be
placed on a solid stand in a location that provides for good air circulation around the two head
amplifier units.
DO NOT cover the tops of the HA-5000 units.
•
DO NOT place the units on carpet or foam.
•
DO NOT subject the units to knocks and shocks as you move them around. This advice is
•
meant particularly for those who may want to place the HA-5000 units on after-market
isolation feet or similar devices.
•
DO NOT place the units near a strong light or heat source.
•
DO NOT place anything heavy on the units.
•
DO NOT allow rubber or vinyl materials to rest on the units' chassis for long periods of
time. This could discolour the metal.
•
DO place the units on a shelf or stand that is stable and not subject to vibration or
sudden shock.
•
DO consider using a high quality power cord and inter-connects, for both inputs and
outputs. The HA-5000 is a highly sensitive piece of electronic equipment designed for
neutrality and will output what you put into it. Allnic's ZL (Zero Loss) Technology cables
will work synergistically with the HA-5000.
DO try to place the HA-5000 away from major sources of RFI and EMI; though well
•
shielded, the HA-5000 will function best away from large power transformers and other
sources of such interference.
6