DIAKAT BL-300 운영자 매뉴얼 - 페이지 10
{카테고리_이름} DIAKAT BL-300에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIAKAT BL-300 11 페이지.
페이지 인쇄BL BL BL BL- - - - 300
300
300
300
Floor grinder
MAINTENANCE
5.
The basic steps of preventive maintenance described in this manual can be carried out by the operator
appointed by the entrepreneur. We recommend that all repairs and adjustments beyond the scope of this
manual are carried out by authorised service centre.
!ATTENTION! In the guarantee period it is prohibited to interfere with the engine and power
transmitting components in any manner whatsoever!
5.1. Cleaning of the machine
Regular cleaning prolong the life of the machine its components and tools. After finishing work clean
the machine from dust and dirt by wet cloth or air before storing. Never use pressurised water for
cleaning.
5.2. Checking screw joints
Check the tightness of screw joints before every start of the machine. Regularly check the tightness of
the tool securing screws.
5.3. Tool maintenance
Regularly check the wear and soiling of tools. If the diamond segments are almost worn off, change the
tool. If the TCT cutters are clogged with dust and dirt and can not rotate freely loosen them by light
taping of the hammer and pressurised air.
5.4. Engine maintenance
Follow the manual for Honda petrol engine!
Page 9 / 9