ALLNIC AUDIO L-5000 DHT 소유자 매뉴얼 - 페이지 9
{카테고리_이름} ALLNIC AUDIO L-5000 DHT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLNIC AUDIO L-5000 DHT 14 페이지. Line stage preamplifier
In the case of any failure indicated by the meter, please
contact Hammertone Audio for assistance.
TUBES
The L-5000 DHT uses the following tubes (see Figure 6):
Two (2) x 6AK6 or 6485
Two (2) x 7233
Two (2) x 3A/110A (or MR0 PT8, if requested for
lower gain)
Two (2) x 3A/109B
All consequences of changing or attempting to change
tubes are borne by the user unless by express agreement
between the owner and Hammertone Audio. Allnic Audio
and Hammertone Audio are not liable in any way
whatsoever for any injury or loss incurred by the user or for
damage to the L-5000, any of its parts, or tubes or
replacement tubes resulting from the user changing or
attempting to change tubes.
SPECIFICATIONS
FOR THE ALLNIC AUDIO L-5000 DHT LINE STAGE
PREAMPLIFIER
Inputs:
Outputs:
Input Impedance:
Frequency Range:
Voltage Gain:
THD (1kHz):
S/N Ratio:
Maximum Output:
Output Impedance:
Power
Consumption:
Line level × 5 pairs
(Balanced × 2, Un-
balanced (RCA) × 3)
Balanced × 2 pair (1 record)
Unbalanced × 1 pair
10kΩ Balanced/Unbalanced
20Hz ~ 20kHz (FLAT)
16Hz ~ 75kHz (-3dB)
+18dB
Output 0.3V, 0.06%
Output 1.0V, 0.16%
-90dB (CCIR, 1kHz)
20V RMS (Non-clipping)
120Ω Constant
30W at 110/120V / 60 Hz
Tubes:
Fuse:
Tube chimney
screws:
Dimensions:
Weight:19.1 kg (42 lbs) unpacked. Packed
shipping weight in original shipping material is 21
kg. (46.2 lbs)
9
3A/110A or lower gain
stage equivalents MR0 PT8
st
or MR0 TS8 x 2 (1
gain
nd
stage); 3A/109B × 2 (2
output - gain stage –
equivalents are CV1671
and 4021a;
7233 (no equivalent) × 2
(Rectifier);
6AK6 (equivalent to
A4361, CV1762) or 6485
(similar to 6AH6, 6AH6WA,
6AH6S, CV2521) × 2
(Voltage Regulator)
2A 250V slow blow
2mm Allen head
430mm (16.9291 inches)
(W)
351mm (13.811 inches)
(D)
211mm (8.3 inches)
(H)
–