DIAL PEC-A-3500-1M 사용자 설명서 - 페이지 7

{카테고리_이름} DIAL PEC-A-3500-1M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIAL PEC-A-3500-1M 12 페이지.

UNPACKING AND INSTALLING CASTERS

Keep the evaporative cooler in an upright position and remove the packaging.

•

Make sure all the parts are present: Castors (4pcs) & Screws (16pcs), Ice Pack (2 pcs).

Lay the evaporative cooler on its side gently. Locate screw holes for the casters under the

•

Reservoir. Use the screws provided to fasten the casters to the underside of the Reservoir. Set the

cooler right-side up when the casters are installed.

CONTROL PANEL OPERATIONS

Use this dial to select fan speed. To turn "on" the fan, turn "FAN" dial from "OFF"

to "L", "M" or "H" (Low, Medium or High).

To activate evaporative cooling turn "PUMP" dial from "OFF" to "ON".

Ensure that the water level is sufficient for the operation.

If this function is not turned on the unit operates as a fan / air cleaner.

To activate the swing mode turn "SWING" dial from "OFF" to "ON". The airflow will

swing from left to right. The up-down airflow can be controlled manually by

adjusting the horizontal louvre.

Page 7 of 12