Bürkert Type 8605 빠른 시작 - 페이지 5

{카테고리_이름} Bürkert Type 8605에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Bürkert Type 8605 5 페이지. Digital control electronics for proportional valves

TransPorT

note!

Transport damages!

Inadequately protected equipment may be damaged during transport.

• During transportation protect the device against wet and dirt in

shock-resistant packaging.

• Avoid exceeding or dropping below the allowable storage

temperature.

note!

Incorrect storage may damage the device.

• Store the device in a dry and dust-free location!

• Storage temperature. -40 - + 55 °C.

10.1 decommissioning

Switch off the Control Electronics Type 8605 as follows:

→

Depressurize the system.

→

Switch off the power supply.

→

Remove the Control Electronics.

→

Keep the control electronics in the original packaging or in some

other suitable packaging.

10.2 restarting

Switch on the Control Electronics Type 8605 again as follows:

→

Unpack the Control Electronics and allow it to reach room temperature

before switching on again.

→

Then proceed as described in chapter "7 Installation".

note!

Damage to the environment caused by device components con-

taminated with media.

• Dispose of the device and packaging in an environmentally friendly

manner.

• Observe applicable regulations on disposal and the environment.

english