ABB AC500 Series 설치 및 구성 매뉴얼 - 페이지 7

{카테고리_이름} ABB AC500 Series에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB AC500 Series 20 페이지. Scalable plc for individual automation, connection of a dcf77 radio clock to an ac500 via ascii protocol
ABB AC500 Series에 대해서도 마찬가지입니다: 적용 사례 (8 페이지), 매뉴얼 (18 페이지)

페이지 인쇄
ABB AC500 Series 설치 및 구성 매뉴얼
8.

1.2.3 Set-up communication parameters in windows

To set-up the communication between the PC and the PLC, e.g., for downloading the compiled
program, you have to set-up the communication parameters.
The IP address of your PC must be in the same class as the IP address of the CPU.
The factory setting of the IP address of the CPU is 192.168.0.10.
The IP address of your PC should be 192.168.0.X. Avoid X = 10 in order to prevent an IP con-
flict with the CPU.
Subnet mask should be 255.255.255.0.
Change the IP
address
1.
2.
3.
2021/05/14
Engineering software Automation Builder > Set-up communication parameters in windows
Select "OK" to end the wizard.
ð Automation Builder license is activated and starts.
Open Windows Control Panel. Click "Network and Internet
è Network and Sharing Center".
Click Change adapter settings.
If using existing network with several devices, please pay attention on
given network rules or contact your system administrator.
Right-click Local Area Connection (Ethernet) and select Properties.
3ADR010584, 2, en_US
Getting started with AC500 V3 products
7