Allo RemoteControl RIB SUN T433 4CH 지침 - 페이지 2

{카테고리_이름} Allo RemoteControl RIB SUN T433 4CH에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl RIB SUN T433 4CH 2 페이지.

Sun clone cloning:

1. Press and immediately release the B button of the SUN CLONE

2. Press and hold the A button, after 5 seconds the LED begins to blink

3. At this point, release the A button

4. Press one of the buttons of the transmitter you want to be cloned to memorize

the same code into the SUN CLONE

5. The LED of the SUN CLONE remains on for 3 seconds to signal that the code has

been correctly received and stored

6. When the LED on the SUN CLONE begins to blink again, you can press the

second button to memorize the second channel into the SUN CLONE

7. Allow the LED on the SUN to blink for 10 seconds until it goes off

8. The SUN CLONE is correctly coded