Allo RemoteControl CHAMBERLAIN TXR4UNI 지침

{카테고리_이름} Allo RemoteControl CHAMBERLAIN TXR4UNI에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl CHAMBERLAIN TXR4UNI 2 페이지.

INSTRUCTIONS

CHAMBERLAIN TXR4UNI

Programming:

At first, refer to opener, control board or external receiver manual to locate the

respective programming button (Fig. 2).

Step1: To enter the universal remote controls programming mode: Push and hold left

and right button on the universal remote control simultaneously until its LED goes

constantly on for approx. 30 sec (= time frame for programming)

Step 2: Now push programming button on the opener, control board or external

receiver. The respective programming LED will go on constantly (also refer to opener,

control board or external receiver manual)

Step 3: Select a button on the universal remote control, push it repeatedly until the

programming LED responds (also refer to opener, control board or external receiver

manual to learn how the respective programming LEDs respond). Proceed with Step 4

Step 4: Push a different button on the universal remote control to exit (LED goes off) its

programming mode

Delete a remote control (also refer to opener, control board or external receiver

manual): Push the programming button on the opener, control board or external receiver

until its programming LED goes off

Delete a remote control:

Push the programming button on the opener, control board or external receiver until its

programming LED goes off