Allo RemoteControl V2 heavy1 지침 - 페이지 2

{카테고리_이름} Allo RemoteControl V2 heavy1에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl V2 heavy1 2 페이지.

CAUTION: if you do not carry out any operation for more than 1 minute, the unit exits from the programming mode, without storing the

INSTALLATION:

settings and changes made are lost.

If necessary, you can reset all parameters to their DEFAULT values

TRAVEL LEARNING:

1. Press and hold the OK button until the display shows SET

2. Release the OK button: the display shows

3. To exit the function, select Exit using the

4. To start the learning procedure of the travel select Learn through the buttons

5. Press and hold the

6. Press and hold the

7. Press the OK button to store the travel and exit the function

Visit our website: www.Alloremotecontrol.com

and press OK to confirm

button to open the door completely

button to close the door completely

and

and press then OK