Alloy FCR200 사용자 설명서 - 페이지 2

{카테고리_이름} Alloy FCR200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alloy FCR200 11 페이지. Fast ethernet fibre optic media converter with advanced lfp

Caution

Electronic Circuit devices are sensitive to static electricity. Dry weather conditions or walking

across a carpeted floor may cause you to acquire a static electric charge.

To protect your switch, always:

•

Touch the metal chassis of your computer to ground the static electrical charge before

you handle the switch.

•

Pick up the switch by holding it on the left and right edges only.

Electronic Emission Notices

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A computing

device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference when operated in a commercial

environment.

European Community (CE) Electromagnetic Compatibility Directive

This equipment has been tested and found to comply with the protection requirements of

European Emission Standard EN55022/EN60555-2 and the Generic European Immunity

Standard EN50082-1.

EMC:

EN55022(1988)/CISPR-22(1985)

EN60555-2(1995)

EN60555-3

IEC1000-4-2(1995)

IEC1000-4-3(1995)

IEC1000-4-4(1995)

Australian C-Tick Compliance.

This equipment is compliant with the required Australian C-Tick standards

FCR200xx User Manual

class A

4K V CD, 8KV, AD

3V/m

1KV – (power line), 0.5KV – (signal line)