Dialog Semiconductor DA9231 사용자 설명서 - 페이지 16

{카테고리_이름} Dialog Semiconductor DA9231에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dialog Semiconductor DA9231 18 페이지. Fuel gauge development kit

UM-PM-039

DA9070 / DA9231 Fuel Gauge Development Kit

Battery Profile Mode

The DA9070 Fuel gauge EVK board can also be configured to perform battery characterization

(battery profile) and run a fuel gauge performance test. This is done using the Power Profile Manager

(PPM) software instead of the DA9070 Fuel Gauge GUI. The profile data for a specific battery is

generated by the PPM and loaded to the MCU. This profile is then used by the pre-loaded Dialog

algorithm for the SOC fuel gauge.

If the included 80mAh battery is used, battery profiling is not necessary; the MCU is pre-loaded with

both the fuel gauge algorithm and 80mAh battery profile.

Also pre-loaded to the MCU is the eval board calibration data. The calibration steps are described in

AN-SW-121 but do not need to be performed in most cases.

Figure 9

shows the jumper set-up of the DA9070 Fuel gauge board while battery profiling is running.

Note the jumper position of J14 in battery profile mode.

User Manual

J27

J24

Revision 2.1

16 of 18

BATTERY

PROFILE

MODE

J14

J20

J19

J12

J15

J25

J23

J22

NDA Confidential

J10

J11

J18

28-Oct-2018