ALLOYSEED BTI-029 사용자 설명서 - 페이지 5

{카테고리_이름} ALLOYSEED BTI-029에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALLOYSEED BTI-029 8 페이지. Paxcess toslink/spdif bluetooth transmitter & receiver

Note:

• RX / TX mode can only be successfully switched after the adapter is

turned off for 3 seconds. After the switch, the pairing history o f the

deviceswill be cleared.

• You can freely switch between SPDIF and AU X mod

• In SPDIF mode, connect devices through SPDIF IN for TX mode and

SPDIF OUT for RX mode

LED Indicators

• Solid Red LED: Charging

• LED Off: Fully charged

. Flashing Red and Blue: Pairing in TX/RX mode

. Flashing Red: Low battery

. Solide Blue LED: Successful paired

How to Use

Charging

1 .Connect the Micro USB end of the charging cable to the charging

port of the Bluetooth adapter

2.Plug the USB end of the charging cable to a USB charging port or

any active USB port

3.The LED indicator will turn red when charging. It will automatically

turn off when the device is fully charged

Note: You can use the adapter while it is charging; We recommend

charging the unit for at least 2 hours before using it for the first time