Burkert 2031 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Burkert 2031에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burkert 2031 19 페이지. Inox 2/2-way diaphragm valve
Burkert 2031에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄
Burkert 2031 빠른 시작 매뉴얼
Type 2030, 2031, 2031 K, 2032,
2033, 2037
BASIC SAFETY INSTRUCTIONS
Risk of burns and risk of fire due to hot device surface if duty
cycle is long or medium temperature is high
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
Leaking medium when the diaphragm is worn.
▶ Regularly check leakage detection bore for leaking medium.
▶ If medium is leaking out of the leakage detection bore, change
the diaphragm.
▶ If the media is hazardous, protect the area surrounding the dis-
charge point against dangers.
Danger due to loud noises.
▶ Depending on the operating conditions, the device may generate
loud noises. More detailed information on the likelihood of loud
noises is available from the relevant sales office.
▶ Wear hearing protection when in the vicinity of the device.
General hazardous situations.
To prevent injury, ensure:
▶ That the system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption, ensure that the process is restarted in a
controlled manner. Observe sequence.
1. Apply supply voltage.
2. Charge the device with medium.
▶ The device may be operated only when in perfect condition
and in consideration of the operating instructions.
▶ Observe the safety regulations specific to the plant for applica-
tion planning and operation of the device.
▶ The plant operator is responsible for the safe operation and
handling of the plant.
▶ The general rules of technology apply to application planning
and operation of the device.
To prevent damage to property of the device, ensure:
▶ Supply the media connections only with those media which are
specified as flow media in the chapter entitled "6 Technical data".
▶ Do not put any loads on the valve (e.g. by placing objects on
it or standing on it).
▶ Do not make any external modifications to the valves. Do not
paint the body parts or screws.
▶ Do not transport, install or remove heavy devices without the aid
of a second person and using suitable auxiliary equipment.
english
5