ABB ACS880-31 빠른 설치 및 시작 매뉴얼 - 페이지 11

{카테고리_이름} ABB ACS880-31에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB ACS880-31 17 페이지. Converter modules with electrolytic dc capacitors in the dc link
ABB ACS880-31에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄
ABB ACS880-31 빠른 설치 및 시작 매뉴얼

13. Start-up the drive

WARNING! Obey these instructions. If you ignore them, injury or death, or damage to the equipment can occur. If
you are not a qualified electrical professional, do not do electrical installation or maintenance work.
Use the control panel to do the start-up procedure. The two commands at the bottom of the display show the functions of
the two softkeys
and
depending on the context. Use the arrow keys
active view. Key
shows a context-sensitive help page.
?
1.
Power up the drive. Make sure that you
have the motor name plate data
available.
4.
Select the language you want to use
and press
(Next).
Note: After you have selected the
language, it takes a few minutes for
the control panel to wake up.
7.
10.
located below the display. The commands assigned to the softkeys are different
,
,
and
2.
The First start assistant guides you
through the first start-up.
Select Menu and press
open the main Menu.
Select Assistants and press
(Select).
5.
Select the localization you want to use
and press
(Next).
8.
11.
to move the cursor or change values depending on the
3.
Select Basic setup and press
(Select).
(Menu) to
6.
Do the following selections. After each,
press
9.
12.
11
(Next).