Dialogic IMG 1010 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Dialogic IMG 1010에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dialogic IMG 1010 18 페이지. Connecting dc power
Dialogic IMG 1010에 대해서도 마찬가지입니다: 설치 지침 설명서 (6 페이지), 빠른 시작 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (4 페이지)
페이지 인쇄
IMG 1010 Quick Start Guide
Connecting DC Power
If the IMG 1010 is powered by DC voltage, the DC input power must conform to the
specifications in the table below.
Input
Vin (voltage)
Iin
Heat Dissipation
Caution: Do not daisy-chain power connections on two or more IMG 1010 chassis and do not
wire chassis directly to other equipment or a common bus bar. The DC power module must be
wired directly to a -48vdc fused power source.
-48 Volt Connections
When connecting -48 vdc to the IMG 1010, follow the instructions in the table and diagram
below.
#12-16 AWG Machine Tool Wire (MTW)
DC Power Module Plugs
Caution: The DC power module plugs are polarity-sensitive. The unit will not operate if the
plugs are not wired correctly, as shown below.
For more information regarding DC Power, please refer to the topic IMG 1010 – Connecting
DC Power in the
online
Min
-40 VAC
1.85 amps
Blue= -48v
Dialogic Supplied (In Plastic Bag)
documentation.
Max
-60 VDC
2.75 amps
307 BTUs/hr
White= -48v return
1.
8