Allpax SM4 사용 설명서 - 페이지 6

{카테고리_이름} Allpax SM4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Allpax SM4 12 페이지. Allen rotary-style gasket cutter

BOTTOM CUTTER REPLACEMENT

(Figure 10E) Remove bottom cutter support bearing by removing two socket head cap screws holding the bottom cutter support bearing in

place. There are two locating pins which align the bottom cutter support bearing to the frame assembly. The pins do not need to be removed, but

you may need a non-marking hammer to help ease the bottom cutter support bearing from the frame assembly as the pins fit tightly.

(Figure 10F) Lift bottom cutter out of frame assembly.

(continued from page 5)

(Figure 10G)

NOTE: Be aware that a bushing is located inside the hole

holding the bottom cutter. This bushing should be reused

when the bottom cutter is replaced.