AllPondSolutions 700IF+ 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} AllPondSolutions 700IF+에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions 700IF+ 16 페이지. Aquarium internal filter with uv

WARNING! MUST BE SUBMERGED

The power cable must have a drip loop to

avoid any condensation build up reaching

the mains (see diagram 1). If the plug does

get wet, DO NOT unplug the cord.

Disconnect the fuse or circuit breaker that

supplies power to the appliance. Then

unplug and examine for presence of water in

receptacle.

Carefully examine your ﬁlter after installation. Do not plug the unit in to the

mains if there is water on any parts not intended to be wet.

If the unit shows any signs of water leakage, disconnect the power supply

cord from the wall socket and consult All Pond Solutions or the retailer you

purchased this unit from for further advice.

If the plug does get wet, DON'T unplug the cord. First, disconnect the

circuit breaker or fuse that supplies power to the appliance. Next, unplug

and inspect for water presence in the receptacle.

To avoid injury, do not touch hot or moving parts such as, but not limited to

impellers.

Please note – this appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge, provided they are given supervision and

instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance. Any maintenance must not

be made by children without supervision.

Diagram 1

Aquarium

Tank

Power

Supply

Cord

Drip

Loop