AllPondSolutions PF-8000 매뉴얼 - 페이지 10
{카테고리_이름} AllPondSolutions PF-8000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions PF-8000 19 페이지. Pressurised pond filter, bio-mechanical filtration, built in steriliser, large filter volume, pressurised closed system, simple user friendly operation
페이지 인쇄
Replacing the UV Bulb
NEVER look directly at the UV light.
When replacing your UV bulb, use this time to clean your quartz sleeve and
carefully examine for any damage or cracks. Take care when handling the
quartz sleeve and UV bulb to avoid any damage to the glass.
1. Follow the steps from the general maintenance section to access the bulb.
2. Once cooled, UV bulb can be safely removed
by gently moving it from side to side and pulling
free of unit.
3. You can now replace your UV bulb and
reassemble the unit.
IMPORTANT!
Check regularly that your UV light is
operational by looking at the UV light indicator located on the top of the filter
casing. Always change your UV bulb every twelve months regardless of it
working or not, as its performance will lessen by this stage.
The PF-8000 & PF-12000 use an 11w two pin PLS UV bulb.
The PF-20000 uses an 18w two pin PLL UV bulb.