AllPondSolutions AqueECO 4500 매뉴얼 - 페이지 10

{카테고리_이름} AllPondSolutions AqueECO 4500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions AqueECO 4500 14 페이지.

My Unit is Cutting Out

1. For optimum function of the unit, we highly recommend the pump is

positioned on a brick, so it is not resting directly on the bottom on the pond.

This is to prevent large clumps of debris blocking the inlet and restricting the

ﬂow.

2. Ensure that all O-rings are in place and well lubricated.

3. Locate the impeller and shaft in the pump and inspect for damage and clear

the ﬁttings and parts of any waste build-up.

4. Ensure that the plastic propeller part of the impeller is attached to the

magnetic part and that they have not come apart or split. If these parts looks

ﬁne and there are two rubber grommets ﬁtted on each end of the shaft, or

already inside the ﬁttings, then re-assemble the unit.

If none of the above resolves your issue, or you require spare parts for your

pump, please contact the supplier of your unit.