AllPondSolutions CUV-118 매뉴얼 - 페이지 5

{카테고리_이름} AllPondSolutions CUV-118에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AllPondSolutions CUV-118 17 페이지. Pond & aquarium uv steriliser

INSTALLATION & USE

Please read the below instructions carefully before beginning to set up your UV

steriliser system. DO NOT CONNECT THE UNIT TO THE MAINS UNTIL SET UP IS

COMPLETE.

1. Prior to installing the unit, examine the quartz sleeve and UV bulb to make

sure these have not been damaged in transportation (see maintenance section).

Handle with care. Do not hold UV bulb with bare hands as this can aﬀect

performance.

2. Assemble your CUV unit as shown below and ensure quartz sleeve is water

tight.

PLEASE NOTE:

unlike other sterilisers, CUV units come with three to four

(depending on the model) inlet / outlet's - very useful if you want to run the

output to a two-fall waterfall, or indeed a waterfall and a ﬁlter. The steriliser is

also supplied with a separate glass viewport which can be used to replace one

of the hosetails for use as a one-in / one-out unit. The CUV-172 model has 2

viewports.

CUV-118 / 136 / 155

CUV-172