DiamaPro Systems SVX3-A 소유자 매뉴얼 - 페이지 3

{카테고리_이름} DiamaPro Systems SVX3-A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DiamaPro Systems SVX3-A 13 페이지. Industrial vacuum
DiamaPro Systems SVX3-A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지)

페이지 인쇄

6. SAFETY PROVISIONS

• Carefully read the instructions in this manual before starting, using, ser-

vicing or operating the vacuum cleaner

• Check that the vacuum cleaner hasn't been damaged in any way

• Never turn on the machine if it is faulty or if you suspect it is faulty

• Check that the switch isn't worn or damaged

• Do not approach the suction intake of the machine with unfastened or

broken garments that could easily be sucked into the machine

• Check that the filters are present and efficient

• Make sure that the filters are installed correctly and in full working order,

always observing the regulations in force in the workplace

• Do not carry out repairs without the manufacturer's authorization

• Never use gasoline, solvents or other flammable liquids for cleaning; only

proper detergents should be used for cleaning

• Never move the machine by pulling the power cable or flexible hose

• Never direct the opening of the machine or the flexible tube towards

people or animals

• Protect the machine from the rain

• Check that the machine is connected to a power source with the correct

voltage indicated on the registration plate

• Make sure that the power cable has no wear or damage. If replacing

the cable, always replace it with another of the same specifications as

the original one: cables that are not approved or of inferior quality may

overheat and cause serious injury to the user

• Make sure that the machine is connected to an appropriate power source

in full working order (check the presence of a fully functional grounding

socket)

• Repairs must only be carried out by authorized personnel and only when

the machine is turned off and disconnected from the power source

• Never allow unauthorized personnel to use the machine

• Make sure that all safety devices are in full working order before turning

on the machine

• Never cover the vacuum cleaner during use

7. INSTALLATION

7.1 DELIVERY AND HANDLING

All machines are carefully tested and checked by DiamaPro before

delivery. The machine is transported inside a protective box or wrapped

in a protective film that allows the courier to see the item during transport

and is securely fixed to a pallet. If any part of the machine is not intact or

has been damaged during transport, file an immediate complaint with the

courier. Parts that have been damaged or broken due to incorrect transport

or handling of the machine will not be recognized by the manufacturer's

warranty. The machine must be lifted and moved using a forklift truck in

accordance with the relevant safety regulations in force in the workplace

7.2 CHECK THE PROPER ELECTRICAL

CONNECTION

Connect the industrial plug to the power cable and connect the plug to a

socket that has the same amp rating and is protected by a line-isolating

switch; in the case of the three-phase vacuum cleaner, it is necessary to

check before use that the motor rotates in the correct direction (clockwise)

as shown by the die-cast indicator on the turbine; if rotation occurs in an

anti-clockwise direction, it is necessary to disconnect the machine from

the power source, invert one of the three phase cables inside the plug and

check again for correct rotation

8. PERIODICAL MAINTENANCE

Maintenance and cleaning operations must ALWAYS be carried out when

the vacuum is turned off and disconnected from the power source. No

particular measures must be taken for the maintenance, cleaning or lubri-

cation of the suction unit. However, it is important to remember that correct

use and servicing are essential if the safety and efficiency of the vacuum

are to be guaranteed.

To ensure regular and constant operation and to prevent the warranty from

becoming void, always use genuine DiamaPro spare parts when repairs

are needed.

8.1 BEFORE TURNING ON AND TURNING OFF

EVERY DAY

• Visually check that the suction hose has not been damaged in any way (it

must not be damaged, torn, crushed)

• Check that the electrical switches are in full working order and are not

damaged in any way

• Check the level of waste inside the main barrel N.B. Empty the main

barrel if you are using an DiamaPro model empty the main barrel

• Check that the suction hose has not been damaged in any way

• Check that the motor head is correctly positioned on the filter chamber

and that the latter is correctly placed on the main barrel

• If the vacuum cleaner is moved, ensure that the power voltage of the play

in this new location corresponds to the one on the technical data plate

8.2 AT EVERY 200 HOURS OF OPERATION

• Check the condition of the primary filter: it must not have tears, holes or

other damage: in this case replace it (see 14.)

• Check that the technical data plate is legible and not damaged in any

way: contact the manufacturer for a replacement if necessary

PERFORM THE FOLLOWING OPERATIONS AT

EVERY 10 HOURS OF OPERATION IF THE VACUUM

CLEANER IS AN DIAMAPRO MODEL

9. PRODUCT DISPOSAL

Dispose of the machine and any accessories according to the legislation

of the state/country. To avoid affecting the environment or your health or

the health of others it is recommended to separate the machine from other

waste, and if necessary properly recycle it.