Miller 059015056 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Miller 059015056에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 059015056 44 페이지.

B. Welding Power Source With Cart And Cooler

Dimensions

58.5 in. (1485 mm)

20.9 in. (530 mm)

43.9 in. (1115 mm)

Weight

Net - 280 lb (127 kg)

3-6. Environmental Specifications

A. IP Rating

This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.

B. Temperature Specifications

Operating Temperature Range*

−10 to 40°C (14 to 104°F)

*Output is derated at temperatures above 40°C (104°F).

C. Information On Electromagnetic Compatibility (EMC)

This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low

voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-

ducted as well as radiated disturbances.

This equipment does not comply with IEC 61000−3−12. If it is connected to a public low voltage system, it is the responsibility of the installer

or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment can be connected.

IEC/TS 61000-3-4 can be used to guide parties concerned by the installation of arc welding equipment with an input current greater than 16 A

in a low voltage network.

IP Rating

IP23S

Storage/Transportation Temperature Range

−20 to 55°C (−4 to 131°F)

956172375_3-A

IP23S 2014−06

Temp_2016- 07

ce-emc 2 2014-07

OM-287504 Page 9