Miller 300459001 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Miller 300459001에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller 300459001 17 페이지.

14. Troubleshooting

Trouble

Excessive noise.

Coolant system does not work.

Decreased or no coolant flow.

15. Circuit Diagram For Cooler

OM-235 464 Page 8

Pump priming noise can occur during startups, or after changing or replacing coolant. Noise will subside

after pump is primed. Tighten filter cap if noise persists.

Have Factory Authorized Service Agent check unit if motor is hitting divider mid-plane.

Be sure input power cord is plugged into an energized receptacle, and power is turned on.

Check line fuses or circuit breaker, and replace or reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch S1 and motor (Mot).

Add coolant.

Check for clogged hoses or coolant filter. Clean filter or clean / replace hoses if necessary.

Remedy

235 469-A