3B Medical RESmart Series 매뉴얼 - 페이지 2
{카테고리_이름} 3B Medical RESmart Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3B Medical RESmart Series 2 페이지. Single battery connection
페이지 인쇄3B M
Luna & RESmart Series: Dual Battery C
edical
REQUIRED COMPONENTS
Freedom
TM
CPAP Battery Kit
Freedom
TM
CPAP Battery (additional battery only)
150W Sine Wave Power Inverter (inverter)
CONNECTION INSTRUCTIONS
Plug the DC power pigtail cord into the DC OUT jacks of both batteries.
Plug the DC input cord into the DC power pigtail cord.
Plug the inverter into the DC input cord and then plug the AC power cord of the PAP device into the inverter.
Turn the PAP device on and it should begin functioning.
The digital display screen will show the charge level of the battery. You may press the charge level indicator
button to illuminate this screen. It will stay illuminated for a few seconds at a time.
When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.
Image shows connection
to a 3B Medical Luna device.
DC OUT JACKS
DC POWER
PIGTAIL CORD
The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge
other small electronic devices with the b attery. The inverter is not proprietary to the Freedom
used with other external batteries.
TM
OPTIONAL FREEDOM
Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).
SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.
DC INPUT CORD
CPAP BATTERY CHARGING ACCESSORIES
BATTERY POWER SOLUTIONS
150W SINE WAVE
POWER INVERTER
onnection
PAP AC
POWER CORD
TM
CPAP Battery and can be
Page 2 of 2
June 2016