Miller AMD-115G 소유자 매뉴얼 - 페이지 17
{카테고리_이름} Miller AMD-115G에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller AMD-115G 28 페이지.
Miller AMD-115G에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)
페이지 인쇄
4-6. Motor Mounting And Gun, Weld Cable, And Gas Connections
6
Tools Needed:
9/16, 5/8 in.
4
5
8
1
3
2
7
802 869-C / Ref. 804 391-B / Ref. 801 443-E / Ref. 804 392-B
.
Drive motor must be isolated
from weld potential.
1
Insulator Plate
When mounting motor,
place
factory-supplied insulator plate
under motor mounting bracket to
provide isolation.
2
Customer Supplied Gas Hose
3
Shielding Gas Valve Fitting
Requires hose fitting with 5/8-18
right-hand threads.
For guns requiring external gas
connections, remove hose from
barbed fitting near gun/feeder
opening and connect to gun.
4
Gun/Feeder Securing Knob
5
Gun/Feeder Opening
6
Gun End
Loosen knob. Insert gun end into
opening. Position as close as pos-
sible to drive rolls without touching.
Tighten knob.
7
Weld Cable Terminal
8
Weld Cable
Select and prepare weld cable ac-
cording to welding power source
Owner's Manual.
For guns with external weld cable,
connect weld cable from gun to
terminal.
OM-179082 Page 13