Miller AMD-115GR 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Miller AMD-115GR에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller AMD-115GR 28 페이지.
Miller AMD-115GR에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)

페이지 인쇄
Miller AMD-115GR 소유자 매뉴얼

4-7. Plug Connections

4-8. Threading And Feeding Welding Wire

Tools Needed:
Pressure
Indicator
Scale
WIRE ADVANCE
Push wire thru guide up to drive rolls; continue to
hold welding wire. Press Wire Advance push button
until drive rolls grab wire. Adjust tension until wire
does not slip.
OM-179082 Page 14
1
POWER
ON
V
OFF
Weld Control
Welding Power Source
Set switches.
Pressure
Adjust
Press Wire Advance push button until
wire comes out of gun. Feed wire to
check drive roll pressure. Adjust knob
enough to prevent slipping.
1
2
Cord is available in 10 ft (3 m),
30 ft (9.1 m) or 50 ft (15.2 m) length.
3
To make connections, align key-
way, insert plug, and tighten
threaded collar.
2
3
Hold wire tightly to keep it
from unraveling.
Pull and hold wire; cut off end.
WOOD
Weld Control
Motor Control Cord (Not
Supplied)
Motor/Drive Assembly
Ref. 801 440 / Ref. 801 443-E
6 in
(150 mm)
Cut off wire. Close cover.
Ref. 804 391-B / Ref. 156 798